epros® DrainPacker
Method for the sectional renovation of damaged buried sewer pipes between DN 50 and DN 1200 by means of short and long liners.

Method for the sectional renovation of damaged buried sewer pipes between DN 50 and DN 1200 by means of short and long liners.
|
General Technical Approval by Deutsche Institut
|
|
|
Applications:
Leakage with or without groundwater infiltration or exfiltration at pipe joints, pipe walls, lateral junctions etc.
Offset pipes, cracks and debris, ruptures
Mechanical wear
Corrosion
Benefits:
Repairs damage in the pipe and joint region over a length of 0.5 metres to 5 metres even in case of strong infiltration
Enables installers to close lateral junctions.
Repairs pipes of nominal diameters from DN 50 to DN 1200 (DIBt approval for DN 100 to DN 800)
Is also used for egg-shaped pipes of different sizes
Can repair circular and egg-shaped pipes made of concrete, asbestos cement, plastics (PVC, PP, HDPE), cast iron, ductile cast iron, reinforced concrete and vitrified clay.
For repair lengths exceeding 5 metres, the epros® DrainPacker method can be used with overlapping liners on the basis of specific instructions to be observed in such applications.
Optimally suited for the sectional renovation (spot repair) in circular and egg-shaped pipes.![]() |
epros® packers are used to transport the epros® resin-impregnated base materials to the points of repair in the sewer pipe. |
The flexible epros®FlexPackers and epros®ShortPackers allow the service flow to be maintained during the curing process thereby avoiding costly overpumping. epros®DrainPackers are manufactured with utmost care according to the ISO 9000 series. Flexible air push rods and adapters are available for all types of packers. So a pipe run can be rehabilitated from just one inspection manhole or access pit. All air push rods and flex adapters are provided with air couplings with retainer ring. Other packers, e.g. for egg-shaped sewers, and further information are available on request. |
|